Coaxial Cable & Accessories
Coaxial Cables (coax) have an inner conductor surrounded by an insulating layer, surrounded by a conducting shield. Coaxial cables also frequently have an insulating outer jacket. Coaxial cables are used to carry high frequency electrical signals with low signal loss. Here is more information on Coaxial Cables.
Custom Cables and Custom Cable Assemblies
RF Parts Company is an expert in Coaxial Cables, cable assemblies and all things cable related. If you custom cable needs, please contact us at 800-RFPARTS (800-737-2787) for a quote.
Coaxial Cables and Accessories
Coaxial Cables are sold by the foot. ( 1 Meter = 3.3 Feet )
|
Waveguide (Elliptical Wavegude)
|
Heliax Specials |
||
RG - Belden Coax Cables |
CNT - Andrew Coax Cables |
||
Rotor Cable |
Coaxial Cable Tools |
|
|
|
|
|
|
|
LMR® is a registered trademark of Times Microwave Systems.
Here is a list of which cables go in which cable groups. PDF
31670-2 CommScope® Adapter Kit for 2" to 3" Round Tower Members (10 per package)
In Stock
Use with 249561 Clamp
- Compatible Diameter, maximum 76.2 mm | 3 in
- Compatible Diameter, minimum 50.8 mm | 2 in
- Material Thickness 0.711 mm | 0.028 in
- Material Type Stainless steel
MFR: CommScope
SKU: 31670-2
KIT-A Mounting Bracket and Mast Pipe Kit, Radiall / Larsen (NOS)
In Stock
The bracket and support pipe included in this package is the same included with the GPS0015-C GPS antenna made by Radiall/Larsen.
- Bracket fits 1" pipe
- Pipe is 12-5/8" long x 1" outside diameter
New Old Stock * No longer available for export
MFR: Radiall/Larsen
SKU: KIT-A-15-C
UA-3 CommScope Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg
In Stock
Universal Angle Adapter Kit with 3/4" Hole (Snap-Ins), 10/Pkg
MFR: CommScope
SKU: UA-3
31768A Angle Adapter, standard, 3/8 in tapped hole
In Stock
31768A Angle Adapter, standard, 3/8 in tapped hole, MFR: Commscope / Andrew
Add to Cart
252029-10KT-P Commscope Triple Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
In Stock
MFR: Commscope / Andrew
SKU: 252029-10KT-P
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. (For stacking three hanger kits. (Rod is 6.72") See below.
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 6")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire
Add to Cart
31670-3 Andrew Adapter Kit for 3" to 4" Round Tower Members (10 per package)
In Stock
Use with 294561 Clamp
Adapters are 1.13 to 4.5 Inch in Diameter
MFR: Andrew
SKU: 31670-3
HG-600T Times Microwave Split Laced Type Hoisting Grip for LMR®600
In Stock
Hoisting Grips provide an effective method for lifting coax cables to the top of a tower where it is tied off to support the cable weight.
MFR: Times Microwave Systems
SKU: HG-600T
LMR® is a registered trademark of Times Microwave Systems.
Add to Cart
HG400T Hoisting Grip LMR®400
In Stock
HG400T Hoisting Grip LMR®400
SKU: HG400T
LMR® is a registered trademark of Times Microwave Systems.
Add to Cart
252028-10KT-P Commscope Single Stack Stainless Steel Hardware for Mini Click-on Hangers 10/Pkg (Hardware Only)
In Stock
Use with 252026-10KT-P Angle Clamp and MCLICK series hanger clamps. See below.
MFR: Commscope / Andrew
SKU: 252028-10KT-P
NOTE: Use the following hardware:
252026-10KT-P Angle Clamp for 5/16" Rod
252027-10KT-P 5/16" Rod & hardware for stacking one hanger kit (Rod is 2-1/2")
252029-10KT-P 5/16" Rod & hardware for stacking two hanger kits (Rod is 10-5/16")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire
252026-10KT-P Andrew Angle Adapter with Miniature 5/16" Tapped Hole 10/Pkg (Clamp Only)
In Stock
Use this clamp to attach to a tower or plate for hanging cable or wire. See below for matching hardware and hanger clamps.
MFR: Commscope / Andrew
SKU: 252026-10KT-P
NOTE: Use the following hardware:
252027-10KT-P 5/16" Rod & hardware for stacking one hanger clamp (Rod is 2-1/2")
252028-10KT-P 5/16" Rod & hardware for stacking two hanger clamp (Rod is 6")
252029-10KT-P 5/16" Rod & hardware for stacking three hanger clamps (Rod is 10-5/16")
68MCLICK Hanger Clamp for 6-8mm Cable or wire
912MCLICK Hanger Clamp for 9-12mm Cable or wire
1316MCLICK Hanger Clamp for 13-16mm Cable or wire