📞 1-800-RFPARTS (1-800-737-2787)
📞 1-760-744-0700 (USA)
✉ ORDERS: rfp@rfparts.com
📍 435 S PACIFIC ST SAN MARCOS, CA 92078
Not finding what you are searching for? Try a partial part number.

High Voltage Blocks/Epoxy Encapsulated

Epoxy Encapsulated High Voltage Rectifiers

Part NumberPIVMaximum CurrentSurge CurrentSize InchesStyle
20 KV 3.0 A 400 A 7.5 x 1 x 1 Single
Encapsulated High Voltage Single String Rectifier with heavy duty components designed for the most demanding of services. This assembly uses 6 Ampere rated diodes. Each diode is bridged with a resistor to divide transients equally across each component. Conservatively rated at 3 Amperes and 20,000 Volts PIV. Each end is slotted for #6 screw mounting
 
Sub for 18050
 26 KV 0.8 A 60 A 4.8 x .63 x 1.5 Double
Encapsulated High Voltage Rectifier in a voltage doubler configuration. Uses 2.5 Ampere diodes encapsulated in thermally efficient epoxy which is then cemented into an aluminum channel for mounting. Rated 10,000 Volts PIV per section, or 20,000 Volts PIV for the whole assembly. This unit is rated 0.8 Ampere average. A slot is punched in each end of the channel for a #6 mounting screw.
3 KV 1.2 A 60 A 6 x 0.75 x 0.75 Double
21050
 No longer available. Use substitute Part Number 3HC15 (below).

 

High Voltage Rectifier Blocks

Part NumberRepetitive Peak Reverse Voltage
VRMM Per Leg
V(Volts)		Avg. Forward
Current Max
IFAVM@55° C
A(Amps)		Max Forward
Voltage Drop
VF@5F Per Leg
V(Volts)		Max Surge Current
IFSM (8.3ms)
A(Amps)
5000 1.0 4.5 50
10000 1.0 9.0 50
5000 2.5 4.8 150
15000 1.5 13.2 150
16000 0.75 11.2 50
20000 2.25 18 150
Grid
per page
🔽
MDA1333H-P Motorola Rectifier HV (Pull)
MDA1333H-P Motorola Rectifier HV (Pull)

In Stock

$70.00

Rectifier Block HV
Used * No longer available for export
MFR: Motorola
SKU: MDA1333H-P

Add to Cart

1 Item(s)

Buy with confidence



© 1998 to RF Parts Company. All Rights Reserved.