Adapters
We stock full range of In Series and Between Series Adapters from the Industries best such as Amphenol, RF Industries, Aeroflex, ERI, etc. Please find the style adapter in the catagories below and click on that catagory. Each Catagory may have various styles so choose on the required series adapter needed.
If you do not find what you require, please contact our sales office for more info.
Please click on an ADAPTER subcategory.
LOW PIM |
7/16 DIN |
4.3-10 |
||
BNC |
C Adapters |
EIA Flange |
Type F |
FME |
HN |
Type N |
LC |
Mini-UHF |
RCA Phono |
SMA |
|
UHF (PL-259 or SO-239)  |
||
|
|
NMO
|
Universal AC |
493-825 Prodelin 1 5/8" Unflanged Offset 90 Degree Coupler with Clamps (Pull)
In Stock
Short side length: 3 3/4"
Long side length: 5"
Used * No longer available for export
MFR: Prodelin
SKU: 493-825-P
NOTE: The photo may not represent the item you will receive. Please ask for additional photos, if needed.
Add to Cart
RLA100-38 ERI 1-5/8" EIA Clamp Type Flange Adapter
In Stock
Adapter only. Hardware and bullets sold separately.
MFR: Electronics Research Inc.
SKU: RLA100-38
Special Order, Delivery is 10-14 days
Add to Cart
RLA150-39A ERI 1-5/8-inch 50 ohm Unpressurized Coupling for Unflanged Line and Fittings
Out of stock
Includes supported inner connector and sleeve outer connector with clamps.
MFR: Electronic Research Inc.
SKU: RLA150-39A
Special order, Delivery is 10-14 days
RLA100-21 ERI Hardware Kit for 1-5/8" EIA Flange
In Stock
Includes: O-ring, silicone lub, Nuts, bolts, & lock washers
MFR: Electronic Research Inc.
SKU: RLA100-21
ACX150-20 ERI Inner Connector for 1-5/8" EIA Connectors (34660)
In Stock
ACX150-20 Inner Connector for 1-5/8" EIA Connectors (Replaces Andrew 34660)
MFR: ERI
SKU: ACX150-20
RLA150-716M ERI 1-5/8" EIA to 7/16 DIN Male Between Series Adapter
In Stock
MFR: PART #: CR216-BR-716M-PT
MFR: Electronics Research Inc.
SKU: CR216-BR-716M-PT
ACX150-10SE ERI Right Angle Adapter 1-5/8" EIA to 1-5/8" EIA
In Stock
ACX150-10SE Right Angle Adapter, 1-5/8" EIA to 1-5/8" EIA, ERI 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector ring, silicone grease, and flange hardware kit,
MFR: ERI
SKU: ACX150-10SE
Add to Cart
1061-1 Andrew 1-5/8" EIA 90 degree Elbow with Swivel Flanges (Pull)
In Stock
- Includes inner connector (bullet) and mounting hardware for one side.
Clean Used * No longer available for export
MFR: Andrew
SKU: 1061-1-P
536-9250 Prodelin Between Series Adapter 1-5/8" EIA to LC Female (Pull)
In Stock
With Air fitting. Comes with Inner connector, no hardware
Clean Used * No longer available for export
MFR: Prodelin
SKU: 536-9250-P
2060-1-CW Between Series Adapter, 7/8" EIA to End Terminal, Cablewave
In Stock
2060-1-CW Between Series Adapter, 7/8" EIA to End Terminal,
MFR: Cablewave
Limited Quantity Available, New old stock
Add to Cart